Medicial Orthopedic Splint for Upper Limb and Lower Limb

1.ISO,CE approved 2.Easy operation 3.Molding fast, Waterproof 4. Factory price, free sample

Orthopedic splint:

Orthopedic splint is composed by manifold layers of orthopedic casting tapes and specially nonwoven fabric. Tt is characterize by better viscosity, fast drying time, high rigidness and light weight. Dure to better biocompatibility, polyurethane is widely used in medical fields. Animal study and acute and chronic toxicity test have proved that medical polyurethane is non-toxic and no teratogenecity, no local irritation and no anaphylactic reaction.

Character & advantage

1) Simple operation: Room temperature operation, short time, good molding feature

2) High hardness & light weight

20 times hard than plaster splint; light material and use less than plaster splint;

Its weight is plasters 1/5 and its width is plasters 1/3,which could reduce wound burden

3) lacunary (many holes structure) for excellent ventilation

Unique knitted net structure make sure good air ventilation and prevent skin damp and

hot & pruritus.

4) Rapid ossification (concretion)

It ossifies in 3-5 minutes after open the package and could bear weight after 20 minutes,But plaster splint need 24 hours for full concretion

5) Excellent X-ray penetration

Good x-ray penetration ability makes X-ray photo clearly without remove the bandage, but plaster bandage need remove to make x-ray inspection.

6) Good waterproofing quality

The moisture -absorbed percent is 85% less than plaster splint, Even the patient touch the water situation, it still could keep dry in the injury position

7) Convenient operation & mold easily.

8) Comfortable & safe to patient/doctor

Material is friendly to operator and it wont become tension after concretion.

9) Wide application

10) Environment friendly

Material are environmental friendly, which could not produce polluted gas after

   inflammation.

How to use splint

1) Select proper specification according to the surgery position

2) Put the pad (cotton coil or cotton slipcover) on the surgery position.

3) Immerse the roll in room temperature water(21-24°C) for 4-6 seconds and squeeze it 2-3 times firmly. If the water warmer than 21-24°C shortens the immersing time, while cooler than 21-24°C water lengthens the time.

4)Take the splint out and press out excrescent water;Absorb water drip of the splint surface with towel.

5) Put the splint on the fixed position, molding it according to need. Mold it in 3-5 minutes after immersing in water because after that time it will concretion. Allow about 10 minutes for sufficient concretion and let patients not move during this time. It could bear electric weight after 20 minutes.

6) Fix the splint with gauze bandage or elastic bandage after concretion 

 Notice: Please contact us by +86 15206708971 or Skype: kldsales , you will get an unexpected service.

Model	Specification	Package	Operating Part
KSF312	7.5cm x 30cm	1piece/bag, 20bags/box, 6boxes/ctn	Upper Limb
KSF335	7.5cm x 90cm	1piece/bag, 10bags/box, 6boxes/ctn	Lower Limb
KSF415	10.0cm x 40cm	1piece/bag, 15bags/box, 6boxes/ctn	Upper and Lower Limib
KSF430	10.0cm x 75cm	1piece/bag, 10bags/box, 6boxes/ctn	Upper and Lower Limib
KSF530	12.5cm x 75cm	1piece/bag, 10bags/box, 6boxes/ctn	Upper and Lower Limib
KSF545	12.5cm x 115cm	1piece/bag, 5bags/box, 6boxes/ctn	Lower Limb
KSF630	15.0cm x 75cm	1piece/bag, 10bags/box, 6boxes/ctn	Lower Limb
KSF645	15.0cm x 115cm	1piece/bag, 5bags/box, 6boxes/ctn	Lower Limb

 

 Notice: Please contact us by +86 15206708971 or Skype:kldsales , you will get an unexpected service.

Medicial Orthopedic Splint for Upper Limb and Lower Limb